Hardware
This section covers hardware products and tools provided by Radix IoT that integrate with the Mango SCADA platform. The current hardware offerings are the RD50 and RD201, pre-configured embedded appliances that ship with Mango Enterprise fully installed and licensed.
The MangoGT appliance referenced in the MangoGT section below has been discontinued and is no longer sold. It is retained for customers with existing MangoGT deployments.
In This Section
MangoGT (legacy)
The MangoGT is a discontinued industrial-grade embedded computer that shipped with Mango Enterprise pre-installed on a customized Debian Linux operating system. This section is kept for reference for existing MangoGT deployments and covers initial setup, physical connections, network configuration, remote access via SSH and SFTP, VPN configuration, and backup procedures.
Mango I/O Tools
The Mango I/O Tools module provides management and configuration utilities for the Mango Analog I/O expansion module, an add-on that was designed for the MangoGT enclosure. Neither current appliance lists this expansion module as supported hardware -- the RD201 has its own built-in digital I/O instead. The I/O Tools page covers device connections, channel configuration, calibration, and firmware management for existing MangoGT deployments.
Current Appliances
| Appliance | Best for | Key specs |
|---|---|---|
| RD50 | Lightweight, low-power edge gateway deployments | ARM Cortex-A7 1 GHz, 512 MB RAM, 4 GB eMMC storage; 1x RS-485, 1x RS-232, 1x 10/100 Ethernet, 1x USB 2.0; 9-36 VDC input; fanless DIN-rail/wall-mount enclosure, -20°C to 60°C |
| RD201 | Higher-throughput edge server deployments, including cellular/GPS sites | Intel Pentium N4200 quad-core, 8 GB RAM, 1 TB SSD; 4x RS232/422/485, 2x Gigabit Ethernet, 4x USB 3.0, 8-bit digital I/O; 12-24 VDC input; optional 4G/LTE and GPS; DIN-rail/wall-mount enclosure, -20°C to 70°C |
Both appliances ship with Mango pre-installed and are DIN-rail or wall-mountable, making them well suited for remote or industrial sites where a dedicated, preconfigured device simplifies installation. See the RD50 datasheet and RD201C datasheet for full specifications.
When to Use Hardware vs. Software-Only Mango
For data center or cloud deployments, or when integrating with existing server infrastructure, the software-only installation of Mango is typically the better choice. See the Getting Started section for software installation instructions.