MangoGT

The MangoGT is a pre-configured industrial hardware appliance from Radix IoT that ships with Mango Enterprise fully installed and licensed. It is designed for deployment at remote or industrial sites where a dedicated, purpose-built device simplifies installation and ongoing management.

This section covers everything you need to set up, configure, and maintain a MangoGT unit.

In This Section

Overview

What the MangoGT is, its hardware specifications, included software, and how it compares to a software-only Mango installation. Start here if you are new to MangoGT.

Connections

Physical ports and connectors on the MangoGT enclosure, including Ethernet, RS-485, USB, HDMI, power input, and status LEDs. Reference this page when cabling your unit.

Accessing the MangoGT

Step-by-step instructions for powering on the MangoGT, discovering it on your network, and logging into the Mango web interface for the first time.

Network Configuration

How to change the MangoGT network settings from DHCP to a static IP address, configure DNS servers, and work with the hostname and IPv6 addressing scheme.

SSH Access

Connecting to the MangoGT Linux operating system via SSH for command-line administration, service management, and troubleshooting.

SFTP File Manager Access

Transferring files to and from the MangoGT using SFTP clients such as FileZilla or WinSCP. Covers connection settings, directory structure, and common file transfer tasks.

Remote Backups

Configuring automated remote backups of MangoGT data and configuration using iDrive, including setup instructions, scheduling, and restoration procedures.

OpenVPN

Setting up an encrypted VPN connection on the MangoGT for secure remote access, including client configuration file deployment and service management.

FAQ

Frequently asked questions about MangoGT hardware, software, operating system, updates, and licensing.